The Dyson V10 launched in 2018, but still remains one of the best vacuums Dyson has ever designed. The Dyson Cyclone V10 is available in 3 different versions, the Dyson V10 Absolute, Dyson V10 Animal, and Dyson V10 Motorhead. Although Dyson V10 series vacuum cleaners are powerful, sometimes users may fall into trouble with this tool. But most of the issues can be solved by following a few steps.
Affiliate disclosure: As an Amazon associate, We'll earn a commission for every successful order through our affiliate links in the article. However, you won’t be charged anything for this.
If your Dyson v10 vacuum cleaner won’t turn on, you have come to the right place. We comprised this guide to help you troubleshoot and solve the problem your vacuum may have. So, here it goes.
Power Problems
At first, you need to make sure that your Dyson V10 is fully charged. The Dyson Cyclone v10 cordless vacuum cleaner is small but powerful. So, you need to charge it on a regular basis especially if you use the extra powerful MAX mode.
If the battery charge gets low, a flashing blue light will indicate it. But if you still see flashing blue light after plug in then there might be problem either your outlet or charging dock or charger. If your outlet or charging dock is ok then repair your charger from a technician or replace it to a new charger from Amazon. If you are in warranty period, call to Dyson helpline about your problem, they will send a new charger for you free.
One should keep in mind that the life span of the battery of any electronic device degrades over time. So, how fast your Dyson v10 battery performance will decrease totally depend on the using pattern. If your V10 battery doesn’t charge or lasts for a short time on the regular mode (not MAX) – then you may have to replace it. You can replace your Dyson V10 battery pack with a new high-capacity one.
When charging if you notice red light flashing many times then your battery is dead, replace your battery to new one to solve the problem. To replace your Dyson battery packs, we recommend you the following battery packs that offer original Dyson V10 battery performance. Just take an overview of the Best Dyson Replacement Battery for your Dyson V10 vacuum cleaner. If you have any issue with charger then replace your old one with new Dyson V10 charger from Amazon.
Replacement Batteries for Dyson V10 Models
Dyson Replacement Battery for V10 Units (Genuine)
- Brand: Dyson
- Compatible with: Dyson Cyclone V10 Absolute, V10 Animal, V10 Motorhead Cordless Stick Vacuum Cleaner.
- Type: Li-ion
- Voltage: 25.2-Volts
- Capacity: 2600 mAh
- Original: Yes
DSANKE 4000mAh Dyson V10 Lithium Ion Battery
- Brand: DSANKE
- Compatible with: Dyson V10 Animal, V10 Absolute, V10 Motorhead Cordless Stick Vacuum Cleaner
- Type: Li-ion
- Voltage: 25.2-Volts
- Capacity: 4000 mAh
- Original: No
- Warranty: 1.5 yr.
- Fits original charging station: Yes
TenHutt 3.0Ah Replacement Battery for Dyson V10
- Brand: TenHutt
- Compatible with: Dyson Cyclone V10 Animal Lightweight, Dyson Cyclone V10 Animal Pro, Dyson Cyclone V10 Absolute, Dyson Cyclone V10 Motorhead, Dyson Cyclone V10 Fluffy, Dyson Cyclone V10 Total Clean
- Type: Li-ion
- Voltage: 25.2-Volts
- Capacity: 3000 mAh
- Original: No
- Warranty: 1 yr.
- Fits original charging station: Yes
Energup Replacement 3000mAh V10 Dyson Battery
- Brand: Energup
- Compatible with: Dyson v10 battery, Dyson v10 absolute battery, Dyson v10 animal battery, Dyson v10 motorhead battery
- Type: Li-ion
- Voltage: 25.2-Volts
- Capacity: 3000 mAh
- Original: No
- Warranty: 1 yr.
- Fits original charging station: Yes
Ruzixt 25.2V 3.5Ah Replacement V10 Battery
- Brand: Ruzixt
- Compatible with: Dyson Cyclone V10 Absolute, Dyson Cyclone V10 Animal, Dyson Cyclone V10 Motorhead Lightweight Cordless Stick Vacuum Cleaner
- Type: Li-ion
- Voltage: 25.2-Volts
- Capacity: 3500 mAh
- Original: No
- Warranty: 1 yr.
- Fits original charging station: Yes
Check Blockage Issues
One of the major things you have to do if your Dyson v10 vacuum cleaner stop working is to clear the bin. Because the bin may be full and your vacuum cleaner may not work properly. Generally, Dyson v10 vacuum cleaner needs continuous airflow throughout them to work properly but a full bin can interrupt the tool from working. Make sure that there is no dirt on the top part of the bin. You may also require giving it one or two knocks and use a narrow blunt object to free all the filth. Next, you should also check for blockages somewhere else inside the vacuum cleaner stick. Don’t forget to turn off your machine switch and make sure it’s not plugged in a power socket.
Other block able parts particularly motor heads can have issues with tangled hair. Sometimes, the cleaner head of the machine need to open. On my Dyson V10, I have done it easily by using a coin. If no seen blockages present them, it is able to be properly worth cleaning your filters, mainly in case you haven’t completed so in a while.
The Way to Locate Your Filters
Filters generally prevent all kinds of dust from fleeing and entering into the motor. Due to the fact filters are designed to lure dust, it makes feel that they also can block airflow after they’re complete of dirt. Cleansing a filter out rejuvenates your cleanser.
How regularly you wash your filters will relies upon on how frequently you operate your vacuum. The reliable guideline from Dyson is that with everyday use, filters have to be wiped clean every month. I live in a small flat with tiles floor and some small rugs, so I have a tendency to clean the filters of my Dyson v10 after one or two months.
Firstly, make sure your vacuum switch is turned off and also make sure that it’s not plugged in. If you face any difficulty finding the filters, it’d be best to follow the user manual instruction. If your user manual is not near your hand, you can collect it from Google that is easily available on Google.
Usually, you could find a removable, narrow, and lengthy pre-filter on the top of the bin of your Dyson v10 model. Simply remove this filter by pulling it right away up. The post-filter may be found in the back of the vacuum cleaner and can normally be removed by twisting it counterclockwise. The filters are normally pink-bluish in color. Pre-filters are often shaped like lengthy, mild cones with a plastic circle on top, at the same time as post-filters are commonly round and encased in sturdy plastic.
The latest Dyson Cyclone V10 models only have one filter – and a handy light indicates when to wash it and when the filter is not replaced correctly.
Filter Washing
At first look, the filters may seem clean, even if it hasn’t been washed for a while. Whatever, don’t be confused by such appearances where a huge amount of dirt and dust may be hidden inside the filter, and it will be more visible on your eyes while you start rinsing it.
Dyson suggests washing the filter unit using cold water without soap or detergent. You need to squeeze and twist the long pre-filters to remove any inner dirt. Carefully you can also rinse out the post filter.
After washing the filters it needs about 24 hours to dry. Dyson recommends their users not to dry the filters using oven or tumble dryer, rather than they suggest keeping the filters where the temperature is somehow higher than the room temperature.
You may require some longer time. Before putting the filters back to the machine, make sure that they are totally damp-free, otherwise, you may have to tolerate an unpleasant smell.
If your filters spread unpleasant smell even after washing and drying, you may need to replace it with a new one. Whenever you replace your machine filter, make sure they’re well suited with your vacuum cleaner, otherwise, your machine needs to struggle to operate.
Purchasing new filters from before can be a good technique for the problem, if you have any issue with old filters. You can purchase some new filters from our recommended Dyson V10 filters list.
Replacement Filters for Dyson V10 (All Models)
Dyson Genuine V10 Vacuum Cleaner Washable Filter(Original)
- Brand: Dyson
- Compatible with: Dyson V10 Absolute, V10 Animal, V10 Total Clean, V10 Motorhead.
- Original: Yes
To save your bucks, check out good and cheap after market filter for your Dyson V10 vacuum.
KONIGEEHRE UPGRADED VERSION 3 PACK HEPA Replacement V10 Filters
- Brand: KONIGEEHRE
- Compatible with: Dyson V10 Cyclone series, V10 Absolute, V10 Animal, V10 Total Clean, V10 Motorhead, SV12
- Packaged included: 3 Pack vacuum replacement filter
1. High-Efficiency True HEPA Filters which will remove 99.9% dust and dirt
2. Easy to remove and replace
3. Washable/reusable, and easy to clean
Isinlive 2 Pack Vacuum Filter Replacement
- Brand: Isinlive
- Compatible with: Dyson V10 Cyclone Series, Cyclone V10 Absolute, Cyclone V10 Animal, Cyclone V10 Motorhead, Cyclone V10 Total Clean, SV12
- Packaged included: 2 Pack vacuum replacement filter
1. Premium Quality filter protects the motor of your v10 cordless vac and offers performance as original ones
2. Easy to remove and replace
3. Washable/reusable, and easy to clean.
Techypro 2-Pack Replacement Parts V10 Filter
- Brand: Techypro
- Compatible with: Dyson Cyclone V10 Absolute, For Dyson Cyclone V10 Animal, For Dyson Cyclone V10 Motorhead, For Dyson Cyclone V10 Total Clean
- Packaged included: 2 Pack vacuum replacement filter
1. Same Quality as the original filter and the sturdy material does not affect the operation of the vacuum cleaner
2. Easy to remove and replace
3. Washable/reusable, and easy to clean.
Finally, after following our above tips and tricks if you notice that your Dyson v10 won’t turn on or don’t work still, it would be a better decision to contact the manufacturer.